The Solar Pump Station
Pumps, Heat Exchanger, and Digital Controller All-in-One
Neatly packaged and designed to simplify any solar hot water installation.

The Pump Station forms the basis for a Closed Loop system. It circulates a Water/Glycol mixture to the collectors and back to a heat exchanger, where it transfers the heat to the potable (drinkable) water loop for storage and use.

In a closed loop system, there are two “loops”, or piping circuits. The “solar loop” travels to the solar collector and back, and the “potable loop” draws water from the storage tank and returns it warmer. The two loops are separate and do not mix, but both connect to the Pump Station where the heat is transferred from the solar to the potable loop.

For the solar loop, the unit contains the heat exchanger, a circulator pump, pressure/temperature gauge, fill/drain valve, pressure relief valve, and check valve.

Animated Graphic
(From Purist Energy)

Solar Pump Station SPS-2-DC

This is a Dual Pump, DC (PV) powered Residential Solar Hot Water Appliance.
This unit contains workings for both the solar loop and the potable loop. These loops consist of; two circulator pumps, heat exchanger, fill valve, drain valve,pressure relief valve, check valve and a pressure/temperature gauge.
It is designed for use with a Photo Voltaic Panel. The (PV) panel works in sink with the collector. When the sun is shining the solar thermal collector and the (PV) panel will both be working, when the sun sets it automatically goes off.
All in one nice neat easy to install package!

Contact the Webmaster
This site developed and maintained by 4D WebMasters.

Copyright ©  2006 Solar Water Works, LLC and  4D WebMasters, LLP